M-ONE BREMSENREINIGER IST DER IDEALE REINIGER für den Einsatz in der Industrie und im Handwerk, er wird bei der Reparatur und Montage von verölten – fettigen Maschinenteilen benutzt. Durch den hohen Wirkstoffanteil wird eine intensive und schnellwirkende Reinigung erreicht. Reduziert Geräusche und arbeitet rückstandsfrei, ist nicht korrosiv und greift Gummi- und Kunststoffteile nicht an. Ideal zur Verwendung an Bremsen, Kupplungen, Motorteilen usw. Anwendung: Im Abstand von ca. 20 cm auf die verunreinigte Fläche aufsprühen und ablaufen lassen. Die Teile mit einem trockenen Lappen bearbeiten. Bei starken Verschmutzungen mehrmals behandeln.

M-ONE Hochtemperatursilikon is a high-temperature silicone with a high temperature resistance from -60 ° C to + 260 ° C (at short intervals up to + 300 ° C). It is specially used for sealing of parts that are affected by high temperatures especially in automobile construction but also for stoves, fireplaces, heating installations and numerous other technical applications. Adheres well to glass, porcelain, stainless steel . After use, the silicone cures with air moisture to form an elastic sealant.

M ONE Kontaktreiniger-Spray is a highly effective special product for cleaning heavily soiled or corroded contacts. Removes dirt such as oil and grease residues, reduces voltage drops due to unclean cable connections and plugs.M ONE Kontaktreiniger-Spray does not attack the common materials and evaporates after a short time without leaving any residue.

M ONE Kontaktspray is a versatile product for cleaning and maintaining electrical contacts. It improves the ability to contact, displaces moisture and minimizes the susceptibility of electrical systems to failure. Lasting protection against penetrating moisture and thus prevents the creation of creepage currents. In addition, permanent protection against corrosion and rust is guaranteed. M ONE Kontaktspray reduces voltage losses, keeps contacts, fuses, plug connections and cable connections free from oxidation and sulfide layers.

M ONE Kettenspray is a highly active special oil for highly stressed chain drives with various additives against wear and corrosion. Withstands all weather conditions. Due to the very good adhesion, M ONE Kettenspray is not thrown off even by rapidly rotating chains and, with its extreme creeping ability, ensures long-term lubrication even in the tightest spaces.

M-ONE FETTSPRAY is a transparent high- performance grease, ideal for lubricating roller and ball bearings, gear and worm gears, all types of joints and couplings. Even in inaccessible places, M-ONE FETTSPRAY penetrates very well due to its excellent creep properties. Also well suited for door locks, door hinges, slide rails, brake rods, bellcranks, etc. Chains and wire ropes can be treated very well with M-ONE FETTSPRAY and have sufficient slip and rust protection after treatment.

M-ONE MOTOR STARTER makes it easier to start benzin and diesel engines. It is used in cars, trucks and engines of all kinds (chainsaws, lawn mowers, construction site generators, etc). The product is quick and reliable, has a low flash point and has a lubricant additive that helps engines start in cold and wet weather. Application: Spray directly on the air filter and start the engine immediately. With the help of a second person, the start is facilitated because it can be sprayed already during the ignition process.

M-ONE Hochleistungs-Rostlöser is a fast acting spray that releases rusted screws, nuts and joints. Also ideal for use as a lubricant, contact spray and corrosion protection. Lubricates reliably, protects against corrosion, displaces moisture and stops squeaking noises. Contains MoS2.

M-ONE UBS Spray is a bitumen-free underbody protection based on rubber resin. After drying, the coating results in a permanently elastic, strong adhesive coating with high abrasion resistance. M- ONE UBS Spray reliably protects against stone and corrosion. After it has dried completely, the underbody protection can be painted over. Application: Optimal processing temperature + 16° C to + 25° C. Shake the can at least 2 minutes from the audible stop of the mixing balls. The parts to be treated must be clean, dry and free from grease, oil and rust. Can be painted over after approx. 8 hours with commercially available paints.

M ONE Kühlerdicht seals small leaks and tears without any problems, such as hairline cracks in the cooler, hose connections and leaks in sealing rings and the water pump. M ONE Kühlerdicht is environmentally neutral and biodegradable. Application: Check cooling water level. When the engine is warm and the heater taps are open, add directly or let it be drawn in via an expansion tank. Then check the coolant level. Can content is sufficient up to approx. 12 liters of coolant.

M ONE radiator cleaner is a system cleaner for cooling circuits in gasoline and diesel engines. Reliably removes deposits containing oil and lime, thus preventing excessive engine temperatures that could damage the engine, promoting heat exchange and eliminating malfunctions. Compatible with all common antifreeze agents, does not attack seals and hoses. Application: Add the content to the cooling water and start the heating. Let the engine run for approx. 30 minutes at operating temperature. Drain the cooling water and rinse the system thoroughly with water. Fill in new coolant according to the operating instructions. 250ml is sufficient for up to 12 liters of coolant.

M-ONE hand washing paste is an ideal product made from wood flour and skin protection agents that is used for thorough cleaning of the hands. It ensures perfect, skin-friendly cleaning, even when it is contaminated by oils and fats.

Excellent chemical and temperature resistance . Max. Thread diameter: m36 Hand-tight after approx. 5 - 10 minutes Temperature range: -55°C to + 180°c

+4993039848112

info@m-one.net

Am Atzelberg 3a 64521 Groß-Gerau Deutschland

Veternik Z. Indrustriale 10000 Prishtinë Kosovë